Добавить новость
smi24.net
News in English
Июль
2024

Bike Check: 18 Bikes Full Suspension Prototypes

0

Peak District based 18 Bikes had two prototypes on display at Bespoked Manchester. Matt talked us through them.

These two bikes are the first prototypes on what is already quite a long course to us finally launching a full-susser that will be available at some point. But these are both prototypes, they are geometry and suspension mules. We’ve got one built up, the conventional, normal bike, we’ve then also got its e-bike brother running the Bosch SX motor. Bosch haven’t delivered the battery that would sit underneath the down tube, we’ll get that next week.

Image Credit: Josh Weinberg
Image Credit: Josh Weinberg
Image Credit: Josh Weinberg
Image Credit: Josh Weinberg
Image Credit: Josh Weinberg
Image Credit: Josh Weinberg

Image Credit: Josh Weinberg

So we’ll be doing testing with these over the rest of the year and then working out how we’re going to manufacture the rear end to actually put it into production. We’re aiming to launch sometime in the new year with hopefully both models available but certainly the conventional bike will be coming first, that’s the highest priority, and the e-bike will come later because it’s only a different front triangle. The idea is that we use the same swing arm on everything.

Okay and so these are both steel, is that what you’re going to be doing with them in future?

So for production the front triangles will be steel made by us in the Sheffield workshop because it gives us the versatility, so we can offer full custom but also set sizes. The rear triangles is a big old question mark at the moment. We’ve got a lot of contacts that we’re talking to about various different production methods, so steel is still an option, made in various different places. We’re also looking at aluminium both welded and bonded, and we’re looking at bonded carbon as well so it’s pretty wide open as to what the rear end will be at the moment.

Okay there is a lot going on here, I’m tempted to start with that bit of bonded carbon that you’ve got in there already, tell us about that bit.

Yeah so that is a floating brake arm that is one of the experiments with the prototype we’re not actually sure if that will make production. But we wanted to see – because it’s a high pivot with an idler everyone will tell you that the brake is going to affect that – we want to see how true that is, so if you look on the other side of the frames there’s actually three mounting points for that. So you could just on the trail do a run, put it in a different position to get a different feedback from the brake, and we do have a neutral position as well that effectively eliminates the floating brake arm.

The reason we’ve done that with carbon is because it was easy to do it and it was a good first experiment with doing a little bit of bonded carbon with just the little pieces bonded into the end of the tube. Originally I had planned to do that out of steel as well but I realised I can do carbon and then we’ve got all the materials.

What kind of ride are you looking for from the finished product?

So we’ve obviously been around a while and we’re after the same sort of thing that we we did with the Number Nine hardtail. We want what we would call a mountain bike, so it’s not tied into a genre. It’s 160mm fork, 150mm rear for just riding. Do whatever you want on it, we’re not aiming for super light, we’re not aiming for it to be an enduro race bike. Just a bike for someone to ride. It’ll be the one bike does everything.

It’s a bold claim!

It’s the sort of bike that we want to ride so that that’s what we’re building basically.

What about the linkages that you’ve got in there did you make those?

No, they were designed in house and it’s one of the reasons that these are unpainted prototypes is that we’ve had some difficulty getting stuff machined. The guy that we dealt with at our previous machine shop left, and then everyone’s busy. Ultimately they will be made in Sheffield, we do have a machine shop there that we use. So the idea is that the production frames we will know who has done every single part, we’ll have much more control over the whole process. It will effectively be that I could name the the guy who did the machining, the guy who does the powder coat – all of that will be done in the UK purely for control more than anything. But at the moment though those links were actually machined in China.

The vision is that in future it’ll be an entirely British bike?

That was purely a timescale thing because China turned it around in 10 days.

You told us the travel, what about some of the geometry numbers?

So we’ll be matching the sizing to the Number Nine frame, so named after the reach dimension. So these are both the 475s because it gives us the most options for the people at the shop to ride them. I would normally ride a 500 and so would Si, but we’ve got some shorter guys as well so we’ve done that so that everyone else can ride it. 65 degree head angle, 77 seat tube – off the top of my head. We do size specific chainstay lengths on the Number Nine – this gets it as well but I can’t remember the numbers for that.

Will it be mullet compatible?

So the idea will be that the production swing arms will have an interchangeable dropout so the main piece of the swing arm will be one piece, with a dropout that does the chainstay length, that will also have a mullet option. So we will be able to have three different chainstay lengths with two different bottom bracket drops by changing the dropout insert.

Okay and it looks like a very straight seat tube there does that mean you can get as much dropper post in there as you like?

Yep, it was one of the design criteria when we were trying to work out suspension layouts. We wanted something that gave full dropper insertion, we wanted to have everything out of the way of the bottom bracket area so that we could slot a motor in instead without having to move anything, and we also wanted to be able to put bottles and accessory mounts in. So the way we’ve got it built up with the Tigon shock with the piggyback on, you can’t fit a full-size bottle in there but you can fit a bottle in there. If you had an inline shock you can fit a full-size bottle. That’s the ultimate aim is we want something that’s practical to you, so full dropper insertion, be able to put bottles on and other stuff as well. and for the e and non-e versions to ride the same.

And will the e and non-e versions have the same geometry as well then?

Fundamentally yes. Because we’re going with the SX motor we view that it’s either a lightweight e-bike or it’s a heavyweight normal bike. It’s one of the reasons that we’re doing these prototypes – to test it. These two frames do have the same geometry, we want to see if that works. It might be that we do make minor tweaks, but it it’s not going to be anything major we don’t think. But that’s one of the reasons that we prototype.

And so the SX motor, is that because you want something light or do you think that bigger batteries aren’t necessary for the sort of riding you do? What’s the rationale there?

Yeah it’s fundamentally what we’re interested in. I’ve just switched over to riding a lightweight e-bike because I’ve got crap knees and ankles, I don’t have any personal vested interest in full fat bikes yet. It’s not to say we might not add one in the future, but in terms of the priority order, a full power e-bike is actually quite low down our list. We’ve got some other projects ahead of that. This is more interesting to us because it’s more like riding a normal bike – that that’s what we prefer.

Is there anything else that we should know about these bikes that I’ve not already asked you about?

I think we’ve covered pretty much everything. The only thing would be that if people do want to keep up to date on it, if they sign up to our newsletter that’s where they’ll see everything. Or follow us on social media.

Brilliant, thank you very much!

Image Credit: Josh Weinberg
Image Credit: Josh Weinberg
Image Credit: Josh Weinberg
Image Credit: Josh Weinberg
Image Credit: Josh Weinberg
Image Credit: Josh Weinberg

Image Credit: Josh Weinberg

https://singletrackworld.com/wp-content/uploads/2020/01/18-bikes-no-9-sheffield-steel-hardtail

https://singletrackworld.com/wp-content/uploads/2024/07/bespoked-best-mtb-award-interview-craft-bikes







На банкет – в Fish Point Family Resort

В депо «Чита» будет установлен первый цифровой весоизмерительный комплекс системы подачи песка под колесные пары локомотива

В Третьяковке на Кадашевской набережной открылся концертный зал

Мичков внесен в Книгу знаменитых людей Кунгура, сообщил директор кунгурского музея: «Никаких его трофеев в музее пока нет, к сожалению»


Adil Rami carga contra Lamine: "No puedo ni verlo, que le den..."

La UFC anuncia un mes de octubre mayúsculo

Las 'Guerreras del Agua' se dan un baño de bronce en el Mundial de Singapur

Brit Who Fought Usyk Calls For Daniel Dubois To ‘Leave The Sport’ After Staying Down In Rematch


В лобовом столкновении кроссовера и грузовика погибли два человека

Возбуждено первое в России уголовное дело о дропперстве

Utrace запускает услугу по валидации IT-систем для фармацевтического рынка

Дивеево ..


Brütal Legend is free in honor of Ozzy Osbourne, but only for 666 minutes

Краткая биографическая справка о центральных персонажах Mafia: The Old Country

Первый трейлер Battlefield 6

'I destroyed months of your work in seconds' says AI coding tool after deleting a devs entire database during a code freeze: 'I panicked instead of thinking'



Utrace запускает услугу по валидации IT-систем для фармацевтического рынка

В депо «Чита» будет установлен первый цифровой весоизмерительный комплекс системы подачи песка под колесные пары локомотива

«Деловые Линии» сократили сроки авиаперевозок по более чем 4400 направлений по России

В Санкт-Петербурге обсудили внедрение ИИ в разработку и оптимальные корпоративные архитектуры


«Каникулы с Росгвардией» проходят в регионах Центральной России

Первая победа «Динамо» в сезоне? «Динамо» — «Ростов»: прогноз и ставка

Оркестр полиции Республики Сербской впервые выступит на фестивале «Спасская башня» в Москве

«Провокация азербайджанской диаспоры»: в Москве уроженец Азербайджана угрожал насилием соседям и кичился своими связями


Как выбрать студию для съемки на маркетплейсы

«Провокация азербайджанской диаспоры»: в Москве уроженец Азербайджана угрожал насилием соседям и кичился своими связями

Месяц в открытом море: студенты ДВФУ отправятся в экспедицию на Камчатку

На МКАД в Москве произошло массовое ДТП, движение затруднено


Алекс де Минор вышел в 1/8 финала турнира ATP-500 в Вашингтоне

Россиянин Сидоренко выиграл соревнования по настольному теннису на Универсиаде‑2025

Фриц пробился в четвертьфинал турнира в Вашингтоне.

Теннисист Медведев: когда я играю хорошо, могу победить любого


На МКАД в Москве произошло массовое ДТП, движение затруднено

Движение по Крымскому мосту временно перекрыли

Патрушев: НАТО усиливает давление у морских границ России

Тихий и опасный. Новые виды коронавируса пошли в наступление и лишают голоса


Музыкальные новости

Высоцкий снова на сцене: цифровой аватар легендарного барда выступит в Москве

Фестиваль Ruskeala Symphony завершился увертюрой Чайковского и фейерверком

Будь собой, а не "звездой": "Europarty" от White Queen

Невозможное возможно: две подопечные фонда «Жизнь в Движении» с ограниченными возможностями покорят вершину Эльбруса


В депо «Чита» будет установлен первый цифровой весоизмерительный комплекс системы подачи песка под колесные пары локомотива

Технологии будущего: MGIMO Ventures объявляет старт четвертого сезона акселерационной программы

В Санкт-Петербурге обсудили внедрение ИИ в разработку и оптимальные корпоративные архитектуры

«Деловые Линии» сократили сроки авиаперевозок по более чем 4400 направлений по России


Лео Канделаки и Анжелика Стубайло сыграют в новую трэвел-игру «Кто куда» на ТНТ

Первая победа «Динамо» в сезоне? «Динамо» — «Ростов»: прогноз и ставка

Кайрат Бермуканов поддержал Петра Яна перед боем в Абу‑Даби

Губернатор Архангельской области доложил Путину о поддержке новых территорий.


На МКАД в Москве произошло массовое ДТП, движение затруднено

Водитель Audi сбил трех пешеходов, переходивших дорогу на западе Москвы

В столичном главке Росгвардии проведён смотр спецтехники

Несколько автомобилей столкнулись на внешней стороне 92-го км МКАД


В сентябре Путину будет представлена обновленная программа строительства кораблей для ВМФ.

У Путина есть роскошный подарок для Китая: США схватились за голову, узнав о нем

Путин дал указание рассмотреть проблемы онкологии в Архангельской области.

Соболезнования в связи с авиакатастрофой в Амурской области выразили зарубежные лидеры


Депздрав Москвы: новый штамм коронавируса "стратус" фиксируют в Москве с мая

Депздрав: новый штамм коронавируса «стратус» фиксируют в Москве с мая

Штамм коронавируса "стратус" захватил 22% всех вирусных заболеваний в Москве

Новый штамм коронавируса "стратус" фиксируют в Москве с мая



Новый штамм коронавируса "стратус" фиксируют в Москве с мая

Фитнес-марафоны на паузе: суд продлил домашний арест блогеру Лерчек

Пластический хирург Софья Абдулаева: подтяжка груди нитями - эффективно ли это

Путин дал указание рассмотреть проблемы онкологии в Архангельской области.



Две трети россиян считают, что спортсмены зарабатывают слишком много

«Каникулы с Росгвардией» проходят в регионах Центральной России

Игровые терминалы в ТЦ: союз ради будущего

"Монсон о спортсменах, которые меняют гражданство в сложный период для России"


Лукашенко с иронией отнесся к санкциям, запрещающим ему въезд в Эстонию

Лукашенко посоветовал не злить его и не допускать падежа в животноводстве

Лукашенко поделился мнением о самой идеальной профессии.

Лукашенко заявил, что в Белоруссии «на всякий случай» готовятся к войне


Сергей Собянин осмотрел Дом-музей Федора Конюхова

Сергей Собянин поздравил москвича — победителя международной олимпиады по физике

Собянин: Около 10 тыс. москвичей начали переселение по реновации этим летом

Сергей Собянин. Главное за день


Москвичи теперь должны платить за зарядку своих электромобилей

6 лет вместе. В Москве пройдет выставка, посвященная пандам Жуи и Диндин

В центре внимания: CorpSoft24 вошел в рейтинг крупнейших ИТ-компаний России

Бурмистров: лисы могут появляться на улицах Москвы в период расселения


«Провокация азербайджанской диаспоры»: в Москве уроженец Азербайджана угрожал насилием соседям и кичился своими связями

Как выбрать студию для съемки на маркетплейсы

Патрушев: НАТО усиливает давление у морских границ России

На Крымском мосту восстановили движение автотранспорта


70 участников СВО в Архангельске показали мотивацию выше госслужащих — Цыбульский

Настольный термотрансферный принтер штрих-кодов iDPRT iE4P

В Архангельске началось обучение бойцов СВО, сообщил Цыбульский.

В Нарьян-Маре из-за холодов возобновили подачу отопления в дома


В центре Балаклавы изменят дорожное движение – причины и сроки

Прогноз погоды в Крыму на 25 июля

"Россия дала мне возможность быть счастливым": Джефф Монсон в Крыму

Россияне выбирают Крым для отдыха с детьми – названы города-лидеры


«Провокация азербайджанской диаспоры»: в Москве уроженец Азербайджана угрожал насилием соседям и кичился своими связями

Движение по Крымскому мосту временно перекрыли

Как выбрать студию для съемки на маркетплейсы

Синоптики спрогнозировали потепление до +29 градусов в Москве 25 июля














СМИ24.net — правдивые новости, непрерывно 24/7 на русском языке с ежеминутным обновлением *